|
|
Large
Clay Extrusion Gun & Die Kit
A new, larger Clay Gun. Barrel is 14" long, 2 1/4"
diameter. Very well made. Extruder gun comes with 4 dies (1/4" round,
1/2" round, 3/8" round, and a blank).
 | Gun with 4 dies - $49.95
|
|
10% off = $44.96
|
|
|
|
6 pc Die Kit:
3/4" and 1/2" round. 1/2" and 3/8"
square. 1/4" x 1 1/8" slot. One blank.
| 6 PC Die kit - |
|
$14
|
|
|
|
3 Blank Die Disks: Make your own
dies
To create you own die: A carpenters coping saw is used to cut out the design and an inexpensive kit of needle files to finish the shape and rub down
with some fine emery cloth and your die is ready. If your extruded shapes are small, you may want to cut several shapes on
one die and close out those not being used with a scrap of plastic or sheet metal.
| 3 Blank Die Disks - |
|
$9.58
|
|
|
|
3 Hole dies:
1/2", 1/4" and 3/8" diameter
| 3 hole Dies - |
|
$9.59
|
|
|
|
Die capability:
We are often asked about compatibility of the dies from the two clay guns listed
immediately above/below. These clay guns have slightly different diameters
(2-1/4" vs. 2"), thus
their dies have slightly different diameters. The dies ARE cross-compatible,
with these limitations: The smaller diameter Scott Creek dies may slip
down the barrel of the Large Clay Gun. Positioning the die as you load the
clay may take extra effort/patience. In our testing, the larger diameter Large Clay
Gun dies just barely fit into the Scott Creek gun. Because of
manufacturing variations, you many need to file a bit of material off the
dies for a fit. If you choose to mix your purchase of dies/guns
please keep this in mind as there will be no special consideration given
on returns/exchanges. |
|
Scott
Creek Clay Gun & Die Kit (Medium Sized)
New style. An exceptionally handy, rugged, extruder for making small runs of a particular form.
We're sure you'll find many uses for this handy tool in your studio or classroom.
Extruder gun comes with 3 dies (2 blanks and 1/2" round), or increase the versatility of your clay gun with the 8
piece die set. Barrel is 8" long, 2" diameter.
| Gun with 3 die - List Price
$49.95
|
|
10% off = $44.96
|
|
|
|
Die Set: Dies can be altered with a small file to get
unique shapes. Works with both the new SC001 and older SC033 SC
Clay Guns.
Round; 3/4", 1/2" and 1/4" diameter
Square; 1/2" 3/8" and 1/4"
Ribbon; 1 1/8 x 1/4 and 3/4 x 1/8
| Die Kit SC002 List Price $19.95 |
|
$18
|
|
|
|
Handle Die Set: 8 dies for
extruding handles for mugs, casseroles, and pitchers. The dies can be altered with a small file to
get unique shapes. Works with both the new SC001 and older
SC033 SC Clay Guns.
| Handle Die Set SC034 - List Price $39.95 |
|
$35
|
|
|
|
Shape and Coil Die Set:
8 popular shape dies to form decorative additions to your pottery.
Includes a large and small coil die. The dies can be altered with
a small file to get unique shapes. Works with both the new
SC001 and the olderSC033 Clay Guns
| Shape and Coil Die Set SC035 -
List Price $39.95 |
|
$35
|
|
|
|
Blank Die: Made of 1/8" thick aluminum of a hardness that will not bend but is easy to cut and
file.
To create you own die: A carpenters coping saw is used to cut out the design and an inexpensive kit of needle files to finish the shape and rub down
with some fine emery cloth and your die is ready. If your extruded shapes are small, you may want to cut several shapes on
one die and close out those not being used with a scrap of plastic or sheet metal.
| Blank dies (each) - List Price $2.50 |
|
$2.50
|
|
|
|
|
Kemper
Klay Gun (Small)
Used to force soft clay through a series of interchangeable discs.
Furnished with 19 different discs to create a wide variety of small
extrusions.
(Note, while the other extruder guns makes normal
thickness extrusions for coil building, etc, the Klay Gun makes very
small extrusions used primarily for decorating.
| K45 Klay Gun with discs/screens |
|
$15.99 $12.79
|
|
| KK45D Disc replacement set $3.29 30% off |
|
$2.29
|
|
|
|
