Firing Supplies
|
In many browsers, Control-F will
allow you to find a word on this page.
|
 |
Orton
Cones
|
 |
Replacement Elements
|
 |
Kiln Wash
|
 |
ITC Kiln coatings |
 |
Gloves
Kevlar and welding gloves
|
 |
Stilts,
tile, plate and bead racks
|
 |
Kiln shelf scraper |
 |
Kiln Sitter
Parts |
 |
Individual Kiln Posts
|
 |
Kiln
Controllers -
for
Retrofit
Skutt Kilnmaster
Orton Controllers
Electro-Sitter |
 |
Pyrometer
Sets
|
 |
Raku Supplies Books, videos, tongs, gloves, kilns |
|
Stilt Mark Cleaning Stone
|
 |
High Temp Wire
|
|
Kiln Vents
Do I Need a Vent?
Skutt Envirovent
L&L Vent-Sure
Orton Vents
Cress Clean Air
|
 |
Kiln Safety
Glasses
|
 |
Cone Plaques and Supports |
 |
Element Pins and Staples
|
 |
Rolling Kiln Stands |
 |
Tongs
|
|
Peep Hole Plugs |
 |
Kiln Cement
|
 |
Kiln
Shelves |
 |
Spare
Parts
Thermocouples, switches,
relays, knobs, etc. |
 |
Kiln Brick
Repair Kit |
 |
Kiln Coating
(brick seal) |
|
Kiln
Vents
|
 |
Fiber
Blanket |
|
|
|
|
|
Kiln Shelf Scraper
With
this in your hand, those shelves will be crying "Uncle!". The
scraping surface is made of silicon carbide. It's very effective
at removing excess kiln wash and glaze drips.
 | 3" x 6" abrasive surface |
|
$28
|
|
|
|
Stilt Mark Cleaning Stone
For cleaning up stilt marks on post-fired items. Nice
for removing little runs of glaze or smoothing rough spots on the bottom
of pots.
| Kemper 4" x 1/2" x 1/2" |
|
$3.19
|
|
|
Peep Hole Plugs
|
|
Soft Brick: fits
Cress
Brick-like. Cool to the touch. Will also work with many kilns |
$6.95
|
|
|
|
|
Ceramic: fits Skutt
Light and hollow. Porcelain-like.
|
$5
|
|
|
|
Ceramic: fits L&L
Solid ceramic |
$9
|
|
|
|
Ceramic: fits
Paragon and Olympic Solid ceramic |
$6.25
|
|
|
|
Ceramic: Universal
Solid ceramic - by Roselli. Will work with many kilns.
Overall length - 3 3/8"
Min Diameter - 1/2"
Max Diameter - 1 1/8" |
$5
|
|
|
|
High
Temp Wire
|
|
Used for any projects
that require wire support in high temperatures of ceramic kilns;
bottle sagging, bead supports, special stilts, element pins,
kiln furniture, cone holders. 17 gauge steel wire contains
no nickel and can be fired up to cone 5. 10 feet. |
$5.89
|
|
|
 |
Stamen wire,
used for smaller jobs. 24 gauge high temp steel wire is
just right for jewelry and small armatures. 10 feet. |
$2.99
|
|
|
Kiln
Element Pins and Staples
|
|
Hold loose kiln elements
in place. 1-1/4" pins are made of heat resistant
alloy for temperatures up to 2500 F (cone 13).
12 pins per
package. |
$2.79
|
|
|
 |
Hold loose kiln elements
in place. 1-1/2" staples are made of heat resistant
alloy for temperatures up to 2500 F (cone 13).
12 staples per
package. |
$3.19
|
|
|
|
|
|
Orton
High Temperature Cone Plaques; 4 positions each, fits Standard size
cones. |
$0.53
|
|
|
Note: These are
greenware and we pack them the best we can but they are very
fragile. If they break,we will credit you instead of
replacing at our discretion.
|
|
 |
Cone
holders made from heat resistant wire.
Five holders per
package.
|
$3.29 Junior/ Small Cones
|
|
$3.79 Standard Cones
|
|
|
Kiln Wash and Glass Separator
A protective coating
for kiln shelves and other areas inside the kiln that may be subjected
to dripping glaze during firing.
Mix this dry kiln wash with water
to a creamy consistency and apply with a brush to the top side of the
kiln shelves. |
Kiln Wash:
General purpose
|
1 lb bag
$5 |
5 lb bag
$11 |
|
|
|
Also
new 1 pint Liquid
No more mixing! $8 |
|
|
Kiln Wash:
High Temperature
Super Duty
|
1 lb bag
$6 |
5 lb bag
$13 |
|
|
|
|
|
|
|
Glass Separator:
General purpose
|
1 lb bag
$6 |
|
|
|
|
Deluxe Kiln Stands with
2" steel castors
|
Deluxe Kiln Stands with 2" steel
casters
Conveniently move your kiln out of the way when not in use.
Heavy-duty stands remain rock-steady with power pressed steel frame and
reinforced legs. 2" smooth rolling steel casters
included. Quick assembly with simple tools. Will accommodate most kiln vents, including Orton and Skutt.
 |
18" square x
12" high
(for all brands of kilns with 13-21" inner diameter.
28 lbs)
|
|
|
24" square x
12" high
(for all brands of kilns with 22" and larger
inner diameter. 36 lbs, ships as 53 lbs.)
|
|
Deluxe Kiln Stands
A sturdy, stationary stand that you can assemble with simple tools.
It will accommodate most kiln vents, including Orton and Skutt.
 |
18" square x 9" high
(for all brands of kilns with 13-21" inner diameter)
|
|
 |
24" square x 9" high
(for all brands of kilns with 22" and larger
inner diameter. )
|
|
Deluxe TALL Kiln Stand
A sturdy, stationary stand that you can assemble with simple tools.
Generally intended for shallow-depth glass kilns (so they're at a more convenient
working height). The stand will work with most kiln vents, including Orton and
Skutt. However in those cases where you have a vent collection
cup, you will need to elevate the cup with bricks or a cement block so
it reaches the bottom of the kiln.
 |
18" square x 18" high
(for all brands of kilns with 13-21" inner diameter) |
|
|
|
Orton Kiln Cement, 1 lb
patching compound
| for filling cracks and holes in firebrick and kiln shelves
| paste type consistency is exceptionally spread-able
| can be used to fill large gaps from 1 1/2" to 2"
wide
| use to 3000°(1645"°C)
| bonds well, fast drying
| expansion matches firebrick - reduces cracking
| premixed, wet cement
| may be sanded to a smooth finish
| reseal-able plastic jar contains approximately 1 lb. |
| | | | | | | |
| Our Price |
|
$12.30
|
|
|
|
See also, ITC 200EZ Ceramic Fill (Kiln
Cement) and refractory coatings
Paragon
Kiln Coating (brick/lid seal)
A permanent high-temperature liquid refractory coating for all types of firebrick kilns. Apply to the inside of the lid and the top rim of brick walls. Makes a hard surface.
Prevents brick from dusting down into the kiln. This is not kiln cement.
| Our Price |
|
$9.00
|
|
|
L&L Kiln brick repair kit
An excellent brick repair kit from L&L. It is intended for use on small to moderate sized cracks
and gouges on the surface of soft firebrick. The kit makes a grout-like material from firebrick dust mixed with water and a small amount of
cement. This compound dries into a material almost exactly like the original firebrick with the same color, consistency, texture and insulating properties.
The Brick Repair Kit includes: 1/2 pint of Special Phosphate Bonded Cement, 1/2 pint of brick facing,
one small firebrick piece, one quart of firebrick dust, and detailed instructions.
Although designed for L&L kilns, here at BigCeramicStore, we have used this kit with great
results on
various brands of our personal kilns. Preview the
kit instructions
| Our Price |
|
$34.00
|
|
|
Gloves
|
|
WELDERS/FIREPLACE
GLOVES
heavy duty, heat resistant
| 14" (35 cm) length
| for temperatures to 250°F (120°C)
| durable cowhide
| for removing peephole plugs, lifting or closing kiln lid, removing
ware after firing |
| | |
| WELDERS/FIREPLACE
GLOVES |
$18.50
|
|
|
|
KEVLAR®
TERRYBEST® GLOVES
the professional welder's choice
| heat and abrasion resistant
| industrial grade
| for use to 1000°F (535°C)
| do not contain asbestos
| 14" (35 cm) length
| allow flexibility and good dexterity |
| | | | |
| KEVLAR®
TERRYBEST® GLOVES |
$56.60
|
|
|
| Firing Gauge and Cone Supports |
|
- Kiln Sitter Firing Gauge (for sitter calibration)
|
$5.00
|
|
- Kiln Sitter Cone Support Holders, pair
|
$8.50
|
|
|
-----------------
Sensing Rods
These are the two most common sizes of sensing rod for Type K model KilnSitter. If the description
below does not describe your kiln, PLEASE measure or otherwise verify the part will fit your kiln. If you
need a different length sensing rod, email
us, the length of the rod and the type of KilnSitter (K or P) and we will try to help identify it.
Sensing Rod, Kiln Sitter, 8 in, Type K (0419)
(2.5" brick kilns - measure length to confirm.) (Fits Skutt 609, 714, 818, 818P, 1018, 1027, and similar model from other
manufacturers) |
$8.00 |
|
Sensing Rod, Kiln Sitter, 8.5 in, Type K (1001)
(3" brick kilns - measure length to confirm) |
$8.00 |
|
|
-----------------
Tube
Assembly
There are two types of tube assembly; P and K. By knowing your model of KilnSitter, you know the
correct assembly type (see below). For each assembly type, there are several different
lengths. You must measure the length of your existing assembly to determine the correct part (see
image shown). Tube assembly purchase includes all
the parts shown, including the cone supports and the firing gauge.
Note: Kiln wall thickness is not a
reliable method of determining the correct part.
|
 |
Type P:
For "P" and "LT-3"
Model KilnSitters |
$40
|
|
 |
Type K:
For
"K" and
"LT-3K" Model KilnSitters |
$40
|
|
If for some reason you are unable to measure
the assembly length (say, it's completely missing from the kiln), then email
us your KilnSitter type (P, K, LT-3, LT-3K), kiln brand (Skutt,
Paragon, etc), model (1027, S24, etc), serial number and manufacturing
date.
|
|
These
are the glasses recommended by Orton Ceramics, the firing experts.
You can get darker, welding glasses with more protection, but then it is
very hard to see the cones. These are deemed to be the best
compromise between visibility and protection.
