|
Piepenburg
Trimming Disc with DVD New! |
 |
Durable plastic "Lazy Susan"-type device
with stainless steel bearing. Helps you hold the position of your
pots while trimming by providing near friction-free rotation and a
dished stationary
surface for applying holding pressure. Efficient simplicity; works
without complication or expense of other devices. Includes a 10
minute instructional DVD for getting the most our of your Trimming
Disc.
 | Piepenberg Trimming Disc with Instructional DVD |
|
$19.95
|
|
|
|
California Pot Tools Lid Calipers |
 |
Calipers
measures inner and outer dimensions for a perfect fits.
| Standard (up to 12" lids) |
|
$19
|
|
|
Ultimate
Edger
This throwing tool is 6 tools in
1.
A:
Creates a double edge on the bottom of a pot
B/D: Round out squared edges on the lip of a pot
C: Create raised design on a lid/pot
E: Creates a single edge on the bottom
of a pot
F: Create a rounded edge on a large
pot.
Made of durable, rust free,
stainless steel plate. Look at the instructions here. |
|
| Ultimate Edger throwing tool. This is the very popular
size we've sold many of. 2" x 4 1/4" |
|
$11.25
|
|
| Now comes in a larger size, for those who throw large 2 3/8" x 5 1/4" |
|
$13.25
|
|
|
|
Faceting Tool, Adjustable |
 |
Otherwise known as a Cheese slicer! Use for faceting thrown pieces.
Replace wire with a spiral from a notebook for ribbed facets.
Heavy duty aluminum frame, brass locking screw, adjustable sliding
roller from thin to 1/2" slices, stainless steel cutting wire, easy
cleaning, non rusting.
| Our Price |
|
$6.00
|
|
|
|
Clay Fluter Faceting Tool |
 |
Double ended with a curved side and an angled side for a variety of
possible facets.
| Our Price |
|
$12
|
temporarily unavailable
|
|
|
Jiffy-Jig
1/4" thick acrylic "templates" for making perfectly
sized, consistent shaped objects. Hold the edge of the template to the outside of the
pot
while throwing, to finalize the shape. Also eliminates need for
trimming. Great for beginners,
or just for increasing production. Hand beveled
edges. Instructions included, or print them here.
(Note: Bevel is cut for use when throwing
counter-clockwise.) |
 |
Mugs (2 pieces) JJ-1
The 2 mug heights are approximately 2" and 3".
| Jig for mugs |
|
$9.95
|
|
|
 |
Teapot or Vase (1 piece) JJ-2
Height is 4 1/4"
| Jig for Teapot or Vase |
|
$16.95
|
|
|
 |
Canister set (3 pieces)
JJ-3
Heights 2 1/2", 4", and 9"
| Jig for Canister Set |
|
$20.95
|
|
|
 |
Platter, Bowl and Dish (3 pieces) JJ-4
Approx 4" high.
| Jig for Platter Bowl and Dish |
|
$22.95
|
|
|
 |
Vase or Crock set (3 pieces) JJ-5
Heights 3 1/2", 4", and 5"
| Jig for Vase or Crock Set |
|
$26.95
|
|
|
 |
Vases
and Pitchers (3
piece) JJ-6
The 3 heights are 6", 8" and 9 5/8".
| Jig for Vase or Picture |
|
$29.95
|
|
|
 |
Nesting Bowls (3 piece) JJ-7
The 3 bowl heights will be approximately 4", 5", 6" (you determine the width of the
bowls). Bowl rims flare out at the top.
| Jig for Nesting Bowls |
|
$26.95
|
|
|
 |
Footed Bowls set (3 pieces)
JJ-8
Heights 3 1/2", 4 1/2", and 5 1/2"
| Jig for Footed Bowls |
|
$26.95
|
|
|
 |
Pitcher and Vase (2 pieces)
JJ-9
Heights are 6" and 8 1/2".
| Jig for Pitcher and Vase |
|
$29.95
|
|
|
Shrink
Ruler |
 |
When clay dries, it shrinks. How much? About 6 % from wet to
bone dry. Then about 6% more from bone dry to a final firing at
cone 10. So 12% would be the average, but it varies from about 10%
to 14% depending on your clay body and how it was thrown or rolled out.
With the Shrink Rule and a little experience,
you can size and plan for shrinkage when creating your wares. Get
the results you want!
Comes with 6%, 10% 12% and 14% rules all on one
tool. Flexible, moisture tolerant, cleans easy.
| Our Price |
|
$13
|
|
|
 |
Flexible
Tape Measure
Tape Measure, Plastic, soft, flexible, 6 feet. Great for measuring
around curved surfaces.
| Flexible tape Measure |
|
$2.20
|
|
|
Exotic Wood
Tools
These tools are handmade from beautiful exotic hardwoods. Made from woods such as Padauk, Canary wood, and
Bubinga. Bringle pick and clay scalpel
|
|
|
Specialized
Throwing Sticks
| Teacup (6.5-7") This
tool is made to facilitate forming a tea cup shape in wheel
work. The head is gently curved to slope the walls of the
cup. The handle is topped with a tip that allows many uses
while forming the cup. |
|
$12
|
|
|
MKM
Throwing Tools
Shaping and forming where
your hands can't reach - easy and fast?
- Forms the wall as desired through very narrow opening
- Moves a clay wall out fast and with control
- Low friction rib heads allow for very thin walls
- Different sizes and shapes for different forms
- Rib heads can be exchanged with other MKM ribs
- Ergonomic Design - shaft won't rotate in your hand during use
Great for reaching into bottles and down narrow cylinders
Click photo to enlarge
|
|
