logo
hotline

Banding Wheels                   Sculpture Stands

Banding wheels are used to hold your piece while it is being decorated.  The less you handle the piece the better, as handling can causes stresses in the clay and smear your designs.  For basic glazing, a CSI turntable is perfectly up to the job.  The other banding wheels on this page are heavier, and are more desirable if you need the piece to turn smoothly, for example to draw perfectly straight lines (bands) around the pot.  

If you are looking for a wheel head for a pottery wheel, we have those available too.  Click here for more information.

Laguna Banding Wheels   

laguna_bwheel_low.jpg (31787 bytes)
2" high

laguna_bwheel.jpg (40841 bytes)
6 1/4" high

BWLA22M.jpg (11695 bytes)
Steel plate

laguna_bandwhl_.jpg (40583 bytes)
10 1/2" diam

These banding wheels represent excellent workmanship featuring cast iron/aluminum wheel heads (except 8 1/2"D x 5"H) and a ring of steel ball bearings for smooth and easy operation.  The concentric circles on the head allow for easy centering.  All but the 2" wheels offer high shank for easy use for large hands.  Even the steel plate wheel with the 5" shank is designed for large hand use.
30H: 12"D x 6 1/4"H

$90

30L: 12"D x 2"H
(rated up to 50 lbs)

$80 

25H: 10 1/2"D x 6 1/4"H

$78 

22M: 8 1/2"D x 5"H Steel plate

$45 

22H: 8 1/2"D x 6 1/4"H

$69

22L: 8 1/2"D x 2"H

$55

Shimpo Banding Wheels    

BWSH30M.gif (54116 bytes)
BW-30M

BWSH25H.gif (44333 bytes)
BW-25H

BWSH25L.gif (31841 bytes)
BW-25L

BWSH22L.gif (43247 bytes)
BW-22L

These banding wheels feature precise ball bearing rotation.  Concentric rings are marked on the wheel head for easy centering.  They turn evenly and smoothly.  Heavy duty construction and rust resistant finish.  Shimpo’s banding wheels are used for decorating, sculpting, carving and hand building.  Designed to provide reliably smooth and even rotation for the most delicate applications.   
BW-30M   11 3/4"D x 4 3/4"H  (rated up to 77 lbs)

$100 

BW-25H   9 7/8"D x 7 1/2"H

$86 

BW-25L   9 7/8"D x 2 1/4"H 

$76 

BW-22L   8 3/4"D x 2 1/4"H

$56

Amaco Decorating Wheels    Sale! 20% off

BWAMAHAB-7.jpg (13849 bytes)
Decorating wheel

BWAMSBAT-8.jpg (35978 bytes)
Setstone bat shown on decorating wheel

All Aluminum wheel is marked with concentric circles and rotates smoothly on a ball bearing and is weight at the rim for greater momentum.  Grooved wheel shank accommodates a small round belt for mechanization.  Use of setstone bats permits continuous use.  Setstone bats absorb water during the drying process to allow easy release of ceramic pieces.  
Decorating wheel and setstone bat sold separately
Aluminum Decorating Wheel, 7" Diameter No. 5  
List Price $30.95

$31.95 
Sale $25.56

Setstone Plaster Bat, 8" Diameter, List Price $32 

$32 
Sale $25.60

Tilt and Turn Table    20% off



Made for design work on flat items, this table works jut like an easel with a few improvements.  Tilts up to approximately 30 degrees, and the non-slip pad holds your project in place.  A hold key holds stops the 7 3/4" diameter table from turning while you work.  
Tilt and Turn Table

$44.99
sale $35.96

11 3/4" diameter table add on for larger items

$17.99 
sale $14.36

CSI Turntables  

 

CSIturntables.jpg (40055 bytes)

Heavy duty, very stable banding wheels turn on bearings.  Top and bottom are particle board with durable Formica cover (colors vary).  
Easily cleaned with damp sponge or wet cloth (do not submerge in water.)  8" wheel can handle up to 300 lbs, and 12-16" wheels can handle up to 500 lbs.
8" Diameter

$20

10" Diameter

$23 

12" Diameter

$27 

14" Diameter

$30

16" Diameter

$34 

Discount Banding Wheel    

BWCSSCS02.jpg (104403 bytes) Low Cost 11.75" diameter banding wheel from China.  Heavy steel base, non-slip rubber bottom, nice bearing.  A good value. (But please don't expect it to be as nice as the Laguna and Shimpo banding wheels,  It's not.  That's why it's $35.)
11 3/4" Diam Banding Wheel

$35

Sculpture Stands 

BWCSTURSTAND.jpg (105034 bytes) This three legged stand is beautifully designed and extremely functional.  Heavy gauge steel base with telescoping non-slip rubber tipped legs that fold out into a 23" wide base.  Stand is adjustable in height from 25" to 40"  11.75" diameter heavy cast iron turntable top with concentric circles rotates on a ball bearing.  Folds up for easy storage.
Standing Precision Sculpture Stand

$125

BWCSFST05.jpg (103949 bytes) This specially crafted stand will hold up to 250 lbs.  4 steel legs with locking wheels allowing the artist to move the stand throughout the studio and then lock the wheels into place while working.  Adjustable height.  Assembly required.
Extra heavy duty steel sculpture stand with 16"x16" wooden top

$162

 

Home  Contact Us   Ordering Info  Product Index  Clearance  Sale  New Items  Newsletters/Tips 
Colors  Tools  Kilns  Wheels  Equipment  Warm Glass  Firing Accessories  Finishing Accessories 


Airbrushes  Banding Wheels   Bats  Bisque   Books  Brushes  Casting Slip  Chemicals  Cink  Clay  Clay Guns   DVD's   Extruders  
Firing Supplies  Giffin Grips  Gift Certificates   Glaze   Grinders  Handbuilding Tools   Glaze Mixers  Kemper Tools   Kilns  
Kiln Accessories  Kiln Elements  Kiln Parts   Mixer/Puggers  MKM Tools  Molds for Clay   Molds for Glass  Mudtools  Orton Cones  Overglaze  Peter Puggers   Pottery Wheels   Pug Mills  Resists   Scales   Sieves  SlabMat   Slab Rollers  SlumpHump Molds   Sponges  Sprayers   Spray Guns  Stains   Stools  Texture Tools  Tile Tables  Throwing Tools  Tongs  Underglaze  UGPencils & Pens  
Ware Carts
  Wood Tile Trivets & Boxes  Xiem Tools  

Not all items shown here.  For more, please select ProductIndex or category links above.
.