 |
Aftosa Wax Resist
Causes glazes to resist and bead up where applied
on a bisque piece. Can be thinned with water (water
soluble). You should wait 2 hours or more after application before
glazing.
 |
1 pint |
|
$8.95
|
|
| 1 gallon |
|
$44.95
|
|
|
 |
Aftosa Black Wax Resist
Leaves a black line when wax burns away!
Click here for an example piece.
Black remains to cone 8.
| 4 oz |
|
$7.25
|
|
|
1 pint |
|
$19.95
|
|
|
 |
Laguna Mobilcer-A Wax Resist
Mobilcer-A is petroleum wax in a water-based emulsion for decorating. (Glaze is
resisted where the wax is applied.) This wax resist is an excellent ready-to-use product. Similar in
performance to heated paraffin wax, without the mess. Dries fast and stays smelling good.
|
1 pint |
|
$8
|
|
| 1 gallon |
|
$35
|
|
|
 |
Duncan Wax Resist - SY547
A wax emulsion to repel underglaze and glazes
applied over it. The wax is burned off in firing, revealing
designs or base colors. Wax resist is also helpful in preventing
chipping and peeling of color when creating sgraffito'ed designs through
opaque underglaze. Burns out at cone 017.
| 2 oz |
|
$2.65
|
|
|
 |
Water based Latex Resist
Latex that can be used as a resist then
peeled off prior to firing. (see tips
on using latex resist) If
it's a little thick, the manufacturer recommends you thin it with water
| Water-based Latex Resist, Pint |
$15
|
|
|
 |
Mask-n-Peel
A water based emulsion formulated by Duncan to protect design areas
or colors, making application of background or adjoining colors faster
and easier. Apply 1 coat of Mask-n-Peel to bisque, un-fired
underglaze or un-fired glaze, let dry thoroughly, apply additional color
layer, then lift an edge and peel the mask away. Multiple layers
and colors may be used for complicated designs.
| 2 oz |
|
$2.65
|
|
|
