logo
hotline

  Spray Gun Cleaner Set, Paasche 62 Sprayer, Paasche L Sprayer, Air Compressor, Amaco Sprayer Outfit    See also Airbrushes  Spray Booths

Paasche 62 Sprayer

TLPS62SPRAY.jpg (12361 bytes)

Operating on relatively low pressure, the 62 Sprayer efficiently sprays glazes, fixatives, medium consistency lacquers, varnishes and enamels.  It handles the application needs which fall between an airbrush and a spray gun.  Used by ceramists, furniture refinishers, vehicle decorators and other hobbyists.  Use clean, dry air with pressure ranging from 20 to 45 lbs., depending on fluids being sprayed and effect desired.

  List Prices

Our Price

 
62-2-3 Sprayer for medium consistency fluids.
$42

$33.60

HL-3/16" air hose, 8' long

$12.50

$11.25

Extra 3 oz Plastic Bottle
$1.50

$1.35

Extra 3 oz Glass Bottle
$1.50

$1.35

Lid for 3oz Bottle (for storage)
$0.80

$0.72

Gasket for 3 oz Bottle (for storage)
$0.71

$0.64

TLPSLSPRAY.jpg (10004 bytes)
Full L Sprayer Assy

Paasche L Sprayer

This unit is ideal for taxidermists, ceramists and hobbyists who wish to apply lacquers, varnishes, heavy glazes and paints. 

TLPSLSC4.jpg (31411 bytes)
Quart cup

A popular glaze sprayer which has the advantage of a large quart size container.  Assembly comes with Hand piece and Aluminum Siphon Quart Cup (you need one of each).  

TLPSL4.jpg (18910 bytes)
Hand piece

We stock #4 size which is best for spraying glazes.  Use HL-3/16 Inch air hose. 

Note:  If your compressor has a quick-connect, you can buy an adapter for this air hose at the hardware store.

  List Price

Our Price

 
L Sprayer Assembly (hand piece and aluminum siphon quart cup)

 $80

$72

HL-3/16" air hose, 8' long

$12.50

$11.25

L Sprayer #4 Hand Piece Only

 $40

$36

L Sprayer #4 Aluminum Quart Cup Only

 $40

$36

Spare #4 tip

 $1.95

$1.76

Critter Spray Gun

TLCR118SG.jpg (13392 bytes)

Works great.  Good value.  High Quality.  Uses a standard 16oz mason jar (included!) - store products right in the jar - air tight until your next project saving time and effort.

Fast color change when utilizing mason jars to store different products.  Easy to operate - just set air pressure at compressor and adjust liquid nozzle up or down for material control - always produces a circular pattern.   Easy to clean - just keep liquid tube & nozzle clean (only air passes through the gun).  Sprays most stains, lacquers, latex paints and water base finishes with a compressor capable of  @ 30 lbs psi or better.   Adjust to spray from 1/4" to 4" in diameter  Sprays contact cements for laminating and other gluing projects
  Price  
Spray Gun (with glass jar)  List price $55

$50

sorry, unavailable
Replacement Jar Gasket

$1.50

unavailable
Repair Parts    
Repair Kit (1 each of the parts most likely to wear out: aluminum tube, liquid nozzle, spring, locknut, jar gasket)

$18

 
Air Nozzle

$3.78

Liquid Nozzle (Brass)

$5.25

unavailable
Liquid Tube (aluminum)

$7

Nozzle Spring

$2.55

Locknut

$1.69

Air Compressor

TLPSD500.jpg (12922 bytes)
D500

The Paasche D500 Air Compressor is an oil-less piston compressor suitable for use with Paasche and most other Airbrushes using properly thinned fluids.  This is their most economical air compressor.  Delivers .4 C.F.M. @ 20 P.S.I. Capable of delivering up to 40 lbs pressure.  

TLPSD500SR.jpg (22026 bytes)
D500SR

New feature in 2008... Automatic Shut-Off with On Start demand when the Airbrush is triggered.  Comes with 3 wire cord, 110-120 volt, 1 phase, 60 Hz motor.   Shipping wt 10 lbs.  

D500SR version features a regulator, pressure gauge & Moisture Trap.  It's a low pressure regulator with a 100 p.s.i. gauge and moisture drain.  This regulator gives control of operating pressure as well as assisting in furnishing clean, dry and regulated air.  Will regulate up to 40 P.S.I. depending on usage (intermittent or constant) and size of airbrush being used.

  List 
Price
Our 
Price
 
D500S  

$131 

$107 SALE $96.30

D500SR (with regulator system)

$161 

$130 SALE $117

A note about Air Compressors

The Paasche D500 is good if you are only airbrushing (not doing full coverage spraying of glazes) and using thin materials.  Otherwise you will need a stronger compressor.  

We recommend purchasing an air compressor such as one of the following.  They are about $100-$125, and can be used with Sprayers as well as Airbrushes.  They have regulators, air tanks and more power to push heavier glazes through the guns.

Coleman Powermate VP201, sold at KMart, Costco, Sam's Club, etc.  2 gallon air tank, 70-100 PSI

Craftsman Compact Air Compressor, 1.5 HP, 2 gallon gank, 125 PSI, #15210

An any other misc one that can be picked up at auto parts stores, etc.

 

Home  Contact Us   Ordering Info  Product Index  Clearance  Sale  New Items  Newsletters/Tips 
Colors  Tools  Kilns  Wheels  Equipment  Warm Glass  Firing Accessories  Finishing Accessories 


Airbrushes  Banding Wheels   Bats  Bisque   Books  Brushes  Casting Slip  Chemicals  Cink  Clay  Clay Guns   DVD's   Extruders  
Firing Supplies  Giffin Grips  Gift Certificates   Glaze   Grinders  Handbuilding Tools   Glaze Mixers  Kemper Tools   Kilns  
Kiln Accessories  Kiln Elements  Kiln Parts   Mixer/Puggers  MKM Tools  Molds for Clay   Molds for Glass  Mudtools  Orton Cones  Overglaze  Peter Puggers   Pottery Wheels   Pug Mills  Resists   Scales   Sieves  SlabMat   Slab Rollers  SlumpHump Molds   Sponges  Sprayers   Spray Guns  Stains   Stools  Texture Tools  Tile Tables  Throwing Tools  Tongs  Underglaze  UGPencils & Pens  
Ware Carts
  Wood Tile Trivets & Boxes  Xiem Tools  

Not all items shown here.  For more, please select ProductIndex or category links above.
.