| All electrical parts and thermocouples are non-returnable.
Please make sure you are buying the right one. While Type-K
thermocouples are all the same electrically, the kiln manufacturers use
different styles, lengths, diameters, and also add mounting hardware for particular
applications. Therefore,
thermocouples are not plug-in compatible / interchangeable with
one-another. It's important you purchase the correct one for your
brand/model of kiln. We stock some thermocouples but not all.
Some are direct shipped from the manufacture. |
Paragon
|
|
 |
PY-50 Thermocouple, Type-K, 1/4" sheathed
with lead wires and ceramic block, new style, for 2.5-3"
wall kilns. |
$52 |
|
|
PY-51 Thermocouple, Type-K, 1/4" sheathed,
new style, for 2.5-3" wall kilns. (no lead
wires or ceramic block) |
$36 |
|
|
PY-53 Thermocouple, Type-K, 1/4" sheathed
with lead wires and ceramic block, new style, for
3.5-4.5" wall kilns (TnFK6 and Dragon). |
$52 |
|
|
PY-52 Thermocouple, Type-K, 1/4" sheathed,
new style, for 3.5-4.5" wall kilns (TnFK6 and
Dragon). (no lead wires or ceramic block) |
$36 |
|
 |
PY-55 Thermocouple, Type-S for 2.5-3" wall
kilns (includes S type lead wires and ceramic protection tube,
does not include ceramic block.) |
$190 |
|
| |
PY-60 Thermocouple, Type-K, 1/8" sheathed
with lead wires for TnF 2 and pyrometers (all wall
thicknesses) |
$58 |
|
|
PY-65 Thermocouple, Type-S for 4-4.5" wall
kilns (includes S type lead wires and ceramic protection tube,
does not include ceramic block.) |
$210 |
|
 |
PY-70 Thermocouple with lead wires for SC series
kiln |
$18 |
|
 |
Knob for 4-way Rotary Switch A-21 and 3-way Switch for
Paragon Kiln, KN3 |
$7 |
|
 |
Knob for Stepless Control, printed numbers for Paragon
Kiln, KN4 |
$6.50 |
|
 |
Knob for S & SnF Switches, pointer indicator for
Paragon Kiln, KN7 |
$6.50 |
|
 |
Porcelain Insulators, new style 1 1/8 in long, 4 in
pkg, for Paragon Kiln, MS1 |
$6.25 |
|
 |
Element Connectors, 2 in pkg, for Paragon Kiln, MS6 |
$3.75 |
|
 |
4-way Rotary Switch for Paragon Kiln, A-21, SW4
(Conversion
guide for single element kilns) |
$42 |
|
 |
Stepless Control Switch for Paragon Kiln, 120v, SW5
(INF 120 101B) |
$30 |
|
 |
Stepless Control Switch for Paragon Kiln, 240v, SW6
(INF 240 102B) |
$30 |
|
 |
Relay 30 amp 12 volt coil for TnF Paragon Kiln, TF3 (Relay
Replacement Guide) |
$29 |
|
 |
Fuse, AGC 1/2A 250V AC for all TnF Paragon Kiln, TF5 |
$3 |
|
|
L&L
|
 |
| T-G-E800/00 8 gauge Type K thermocouple
with ceramic terminal block. Mounting kit not included. |
$32 |
|
| T-G-TUBE/00 8 gauge Type K Industrial Mullite
protection tube. |
$29 |
|
| T-G-MKIT/00 Includes 2 screws and six 1/4"
high ceramic standoffs. |
$8 |
|
| T-G-E140/00* 14 gauge Type K Thermocouple Exposed
(includes high temp plastic terminal block. This is for
older kilns only and is not normally recommended. (See
comments below.)* |
$35* |
|
| T-G-SXXX/00 Type S Thermocouple
(120mm-4.75") Used on kilns with 2.5 or 3"
brick. Includes ceramic terminal block and alumina
protection tube. |
$210 |
|
| T-G-SXXX/06 Type S Thermocouple
(160mm-6.3") Used on front-loading kilns with extra
insulation) Includes ceramic terminal block and alumina
protection tube. |
$235 |
|
* Newer kilns use 8 gauge thermocouples. Older ones used 14
gauge. It is recommended that you drill out the brick in older kilns to accept the
larger diameter 8 gauge thermocouples. If you prefer not to do that,
purchase the 14 gauge.
|
Skutt
|
| Thermocouple, Type-K, 6 in, 8 ga, open element (Skutt PN 1515).
For use in kiln mounted, KilnMaster controllers. (Best
replacement for all Skutt kiln-mounted controllers. If you
currently have a sheathed thermocouple, this is your most
reliable replacement. However, it may require slight kiln
modification, drilling of skin and kiln brick, to install.) |
$16 |
|
| Thermocouple, Type-K, 6 in, sheathed (Skutt PN
1594).
For use in kiln mounted, KilnMaster/ GlassMaster controllers. (Same-part
replacement for Skutt kiln-mounted controllers with sheathed
thermocouples purchased prior to Feb 2004 . If you
currently have a sheathed thermocouple, this is the most
direct replacement. No kiln modification required.
However, these thermocouples are considered unreliable
when fired above 1800F. Purchase for use low-fire
use only. |
$44 |
|
For more info see these links
http://www.skutt.com/pdf/TechUpdates/tech1.pdf
http://www.skutt.com/features/thermocouple.html
Or call Skutt for assistance 503-774-6000
|
Cress
|
 |
Spare/Replacement
Thermocouples
8 gauge thermocouples. Exposed element, type K
thermocouple. |
|
| Thermocouple, 5 inch (1.5 bead) |
$46
|
|
| Thermocouple, 7 inch (2 bead) |
$46
|
|
| Thermocouple, 10 inch (3 bead) |
$48
|
|
|
Olympic
|
 |
 |
Thermocouple, Type-K, 6" (fits most Olympic
kilns)
(thermocouple
replacement proceedure) |
$47 |
|
|
Thermocouple, Type-K, 10", "Long-style
" (for commercial kilns) |
$47 |
|
|
Thermocouple, Type-S |
$195 |
|
 |
120V Relay for Olympic Kiln
(light gray, 66.82.120.0300) (wiring
diagram) |
$31 |
|
 |
12V Relay for Olympic Kiln
(black, T92P7D22-12) (wiring
diagram) |
$31 |
|
 |
3 Position Knob for Olympic Kiln |
$3.65 |
|
 |
3 Position Switch for Olympic Kiln (271-91-317)
(wiring
diagram) |
$21 |
|
 |
6-30R Surface Mount NEMA receptacle, 30 amp |
$31 |
|
 |
6-50R Surface Mount NEMA receptacle, 50 amp |
$31 |
|
 |
High Temp Connectors for Olympic Kilns |
$1.05 |
|
 |
Infinite Position Knob for Olympic Kiln |
$3.65 |
|
 |
Infinite Switch for 120v Olympic Kiln (INF-120-85)
(wiring
diagram) |
$21 |
|
 |
Infinite Switch for 240v Olympic Kiln (INF-240-76B)
(wiring
diagram) |
$21 |
|
 |
Porcelain Element Insulators
(1.5" L X 5/8" D) (3/16" D hole) |
$0.65 |
|
 |
Interbox Plug & Receptacle for Olympic Kilns
(old style) |
$26 |
|
 |
Twist n Lock Interbox Plug & Receptacle for Olympic Kilns (2 boxes, not matched)
(replacement
instructions) |
$52 |
|
|
|
